Low carbon steel, drawn wires
1. General Purpose low carbon content steel round wires according to the polish standard PN-67/M-80026 and wires for nail production
| Diameter (mm) |
Weight(kg) |
Coil internal Diameter(mm) |
Resistance to stretching Rm min (MPa) |
| 0.20 - 0.45 |
5 - 20 |
140 - 160 |
- |
| 0.50 - 0.75 |
20 - 30 |
140 - 160 |
- |
| 0.80 - 1.30 |
30 - 100 |
160 - 250 |
750 |
| 1.40 - 1.80 |
80 - 150 |
250 - 350 |
700 |
| 1.90 - 2.20 |
100 - 150 |
300 - 400 |
700 |
| 2.30 - 2.70 |
100 - 250 |
350 - 450 |
650 |
| 2.80 - 3.70 |
200 - 300 |
350 - 500 |
600 |
| 3.80 - 4.60 |
200 - 300 |
450 - 550 |
550 |
| 4.70 - 8.00 |
200 - 300 |
450 - 650 |
550 |
| 9.0 - 12.00 |
200 - 300 |
600 - 700 |
550 |
Types of wires :
- low tensile strenght (mild) wires Rm below 420 MPa
- lower tensile strenght (semi ? hard) wires Rm 420 ? 600 MPa
- normal tensile strenght (hard) wires Rm over 600 MPa
Condition of wire surface:
- grey bare - dry drawn - between 1.0 to 12.0 mm
- polished bare - wet drawn
- dark annealed bare - between 1.0 to 5.0 mm
- light annealed bare - between 0.2 to 1.2 mm
2. Square stranded cross ? section wires
| Wire diameter (mm) |
Coil weight (kg) |
Coil internal diameter (mm) |
| 2.4 - 4.20 |
150 - 250 |
550 - 600 |
